Oil Based

SIGNAL CUT 310	Signal Cut 310 is a heavy duty gun drilling oil that contains active sulfur. It is formulated to maintain fine finishes and to hold size. It also features high heat dissipation, less smoke, and minimum oil carry-off on metal chips and the work place. Signal Cut 310 also contains a mist suppressant. | M.S.D.S. |
SIGNAL CUT 320	Signal Cut 320 is medium to heavy duty cutting oil, specially formulated for lower-speed applications, such as boring and lapping of ferrous and non-ferrous metals. Signal Cut 320 also contains a mist suppressant to minimize fogging of the cutting oil in the workplace during high- speed machining operations. This fog-suppressing property permits high-speed grinding without sacrificing the cooling and swarf removal ability associated with its relatively light viscosity. Signal Cut 320 is well suited for machining aluminum and aluminum alloys. Its low viscosity and fatty compounding suit it for machining of magnesium as well. Signal Cut 320 is a multi-purpose product that contains no active sulfur. Its versatility as a coolant, cutting fluid, and machining tool lubricant makes it an excellent choice for which the manufacturer recommends a single multi- functional product. | M.S.D.S. |
SIGNAL CUT 331	Signal Cut 331 is a fully fortified heavy duty semi-synthetic full bodied light colored cutting fluid. Formulated to meet the exacting requirements of modern high pressure, high speed CNC Screw Machines. Signal Cut 331 is recommended for use on steels of the most difficult machinability, including all types of stainless and heat resistant steels. It also is an excellent form and thread-grinding oil for the soft, tough, or stringy steel alloys. Signal Cut 331 contains a mist suppressant to minimize fogging and stray mist in the work place. Its relatively high flash point helps to prevent smoking in service. It incorporates non-staining technology. | M.S.D.S. |
SIGNAL CUT 355	Signal Cut 355 is a moderate to heavy duty sulfur-active cutting oil generally used on medium- to low- machinability steel or titanium.. Signal Cut 355 is recommended for use on steels of the most difficult machinability, including all types of stainless and heat resistant steels. It also is an excellent form and thread-grinding oil for the soft, tough, or stringy steel alloys. Signal Cut 355 contains a mist suppressant to minimize fogging and stray mist in the work place. Its relatively high flash point helps to prevent smoking in service, and its low pour point facilitates handling at low temperatures. | M.S.D.S. |
SIGNAL CUT 360	Signal Cut 360 is a multi-purpose product that contains no active sulfur. Its versatility as a cutting fluid, and machining tool lubricant makes it an excellent choice for screw cutting lathes and other cutting machinery for which the manufacturer recommends a single multi-functional product. | M.S.D.S. |
SIGNAL CUT 365	Signal Cut 365 is a multi-purpose product that contains no active sulfur. Its versatility as a cutting fluid, and machining tool lubricant makes it an excellent choice for screw cutting lathes and other cutting machinery for which the manufacturer recommends a single multi-functional product. Signal Cut 365 also incorporates mist suppressing technology that minimizes misting or fogging of the cutting oil in the work-place during high-speed operations. | M.S.D.S. |
SIGNAL CUT 370	Signal Cut 370 is a medium duty cutting oil specially designed for light to mid-range applications. It is a transparent, lightly colored, non-staining cutting oil which provides superior low frictional properties. Signal Cut 370 is a multi-purpose product that contains no active sulfur. Its versatility as a coolant, cutting fluid, and machining tool lubricant makes it an excellent choice for screw cutting lathes and other cutting machinery for which the manufacturer recommends a single multi-functional product. | M.S.D.S. |
SIGNAL CUT 375	Signal Cut 375 is a medium duty cutting oil specially designed for mid to heavy duty applications. It is a darker colored, non-staining cutting oil which provides superior low frictional properties. Signal Cut 375 is a multi-purpose product that contains no active sulfur. Its versatility as a cutting fluid, and machining tool lubricant makes it an excellent choice for screw cutting lathes and other cutting machinery for which the manufacturer recommends a single multi-functional product. | M.S.D.S. |
SIGNAL CUT 380	Signal Cut 380 is a medium duty cutting oil specially designed for mid to heavy duty applications. It is a darker colored, non-staining cutting oil which provides superior low frictional properties. Signal Cut 380 is a multi-purpose product that contains no active sulfur. Its versatility as a cutting fluid, and machining tool lubricant makes it an excellent choice for screw cutting lathes and other cutting machinery for which the manufacturer recommends a single multi-functional product. | M.S.D.S. |
SIGNAL CUT 390	Signal Cut 390 is dark colored sulfur active cutting oil suitable for a wide range of ferrous metalworking applications where high speeds, smooth finishes, and long tool life are important. Signal Cut 390 is recommended for the most severe threading, tapping, broaching, and other operations. Because of its superior performance under severe conditions, Signal Cut 390 offers a significant advantage in versatility. Because this product is sulfur active, it will discolor copper and its alloys and normally should not be used in machining these metals if staining is objectionable. | M.S.D.S. |
SIGNAL CUT 394	Signal Cut 394 is dark colored sulfur active cutting oil suitable for a wide range of ferrous metalworking applications where high speeds, smooth finishes, and long tool life are important. Signal Cut 394 is recommended for the most severe threading, tapping, broaching, and other operations. Because of its superior performance under severe conditions, Signal Cut 394 offers a significant advantage in versatility. Because this product is sulfur active, it will discolor copper and its alloys and normally should not be used in machining these metals if staining is objectionable. | M.S.D.S. |
SIGNAL CUT 395	Signal Cut 395 is dark colored sulfur active heavy duty cutting oil formulated for the most demanding metal working applications. Signal Cut 395 is recommended for the most severe threading, tapping, broaching, and other metal working operations. Because of its superior performance under severe conditions, Signal Cut 395 offers a significant advantage in versatility. This product contains sulfur active; that is, it will discolor copper and its alloys and normally should not be used in machining these metals if staining is objectionable. | M.S.D.S. |
SIGNAL CUT 401S	Signal Cut 401S is a specially formulated synthetic ester developed for oil mist lubrication systems. Signal Cut 401S is designed especially for various aluminum machining operations. It can also be used in other non- ferrous applications. | M.S.D.S. |
SIGNAL KOTE 606	Signal Kote 606 is a non-hardening water displacing rust proofing compound that will not weather, harden, crack, or peel. Signal Kote 606 is a fully fortified rust protection system capable of standing up to the rigors of overseas transport. Signal Kote 606 is made available in a solvent reduced state, facilitating efficient application either by spray or brush. Meets or exceeds Mil-C16137D. | M.S.D.S. |

| Back to Top |

Water Based

Signal Cut 050 Soluble Oil	Signal Cut 050 Soluble oil is a premium quality heavy duty, fully fortified, emulsifiable oil concentrate recommended for the most severe machining operations on the most difficult to machine metals. It can also be used to machine aluminum and copper alloys. Signal Cut 050 Soluble oil protects machine tools and parts from rust by means of an effective corrosion inhibitor system that leaves a clean, light lubricating residue on parts. This emulsion concentrate forms a stable, white, non- foaming emulsion in both soft and hard water and is formulated to provide long sump life in centralized systems.
SIGNAL CUT 121	Signal Cut 121 is an excellent general purpose semi-synthetic coolant that is specially designed for use in water in which hardness exceeds 200 ppm. In addition to excellent machining capabilities Signal Cut 121 offers natural resistance to micro- organism degradation. Signal Cut 121 is recommended for general machining applications. It is suitable for use on ferrous metals,from cast iron to tool steel and alloys, in boring, drilling, reaming and turning operations.
SIGNAL CUT 121B	Signal Cut 121B is an excellent general purpose semi-synthetic coolant that is specially designed for use in water in which hardness exceeds 200 ppm. In addition to excellent machining capabilities Signal Cut 121B offers natural resistance to micro- organism degradation. Signal Cut 121B is recommended for general machining applications. It is suitable for use on ferrous metals,from cast iron to tool steel and alloys, in boring, drilling, reaming and turning operations.
SIGNAL CUT 121B-1	Signal Cut 121B-1 is an excellent general purpose semi-synthetic coolant that is specially designed for use in water in which hardness exceeds 200 ppm. In addition to excellent machining capabilities Signal Cut 121B-1 offers natural resistance to micro- organism degradation. Signal Cut 121B-1 is recommended for general machining applications. It is suitable for use on ferrous metals,from cast iron to tool steel and alloys, in boring, drilling, reaming and turning operations.
SIGNAL CUT 121B-2	Signal Cut 121B-2 is an excellent general purpose semi-synthetic coolant that is specially designed for use in water in which hardness exceeds 200 ppm. In addition to excellent machining capabilities Signal Cut 121B-2 offers natural resistance to micro- organism degradation. Signal Cut 121B-2 is recommended for general machining applications. It is suitable for use on ferrous metals,from cast iron to tool steel and alloys, in boring, drilling, reaming and turning operations.
SIGNAL CUT 151	Signal Cut 151 is an excellent heavy duty fully fortified oil rejecting, semi-synthetic coolant that contains no chlorine, sulfur, or phosphorous compounds. Signal Cut 151 provides excellent wetting and chip/swarf setting capabilities. This allows for uniform coolant to metal surface contact important for metal surface contact important for cutting operations as well as corrosion inhibition during in-process storage.
SIGNAL CUT 181	Signal Cut 181 is an excellent general purpose user friendly semi-synthetic coolant. This product is designed for general purpose machining & grinding operations on ferrous and non ferrous materials. Signal Cut 181 is formulated incorporating advanced chemistry to perform as a bio-stable product thus greatly increasing sump life. Signal Cut 181 is environmentally safe and contains no chlorine, nitrites, heavy metals, phenols or diethanolamines.
SIGNAL CUT 211	Signal Cut 211 is a specially formulated full synthetic grinding coolant that offers excellent rust and fungal protection. Signal Cut 211 is designed for all types of metals and alloys. This would include cast iron, steels, stainless, and nonferrous materials. Signal Cut 211 contains no DEA, chlorinated, sulfurized, or phosphorus containing additives.
SIGNAL CUT 221	Signal Cut 221 is an excellent general purpose full synthetic coolant that contains no chlorine, sulfur, or phosphorous compounds. Signal Cut 221 provides excellent wetting and chip/swarf setting capabilities. This allows for uniform coolant to metal surface contact important for metal surface contact important for cutting operations as well as corrosion inhibition during in-process storage.
SIGNAL CUT 222	Signal Cut 222 is an excellent heavy duty fully fortified full synthetic coolant that contains no chlorine, sulfur, or phosphorous compounds. Signal Cut 222 provides excellent wetting and chip/swarf setting capabilities. This allows for uniform coolant to metal surface contact important for metal surface contact important for cutting operations as well as corrosion inhibition during in-process storage.
SIGNAL CUT 231	Signal Cut 231 is a specially formulated full synthetic bio-stable coolant designed for the machining of aluminum and its alloys. Signal Cut 231 provides excellent wetting and chip/swarf settling, critical in maintaining coolant to surface contact for maximum cooling of tooling and work piece.

| Back to Top |